Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
(90 reviews)
Price: $273.26
In Stock
Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
Item # UF35-946403
Retail:$323.48
Our Price: $273.26
You Save: $50.22
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (90)
- Q & A (0)
- Videos (1)
- Photos
- Used (1)
Ultra-Fab Products RV and Camper Hitch - UF35-946403
- Frame Mount Hitch
- 47 - 77 Inch Wide Frame
- Weld-On
- 2 Inch Hitch
- 350 lbs TW
- Ultra-Fab Products
Use this receiver to carry a bike rack or cargo carrier on the back of your trailer. Do not use for towing. Unit welds onto I-beam, C-channel or rectangular fifth-wheel trailer frames.
Features:
- Provides 2" x 2" trailer hitch receiver opening at the rear of your trailer
- Perfect for mounting a bike rack, cargo carrier or other hitch accessory
- Do not use for towing
- Welds onto I-beam, C-channel or rectangular trailer frames
- Gusset may be required to weld onto I-beam frames
- Plate may be required to weld onto a C-channel frame
- Constructed of heavy-duty, powder coated steel
Specs:
- 350-lb Maximum tongue weight capacity
- Adjustable width: 47-1/8" to 77"
- 1-Year warranty
35-946403 UltraFab Accessory Adapter for 5th Wheel Trailers
Installation Details
Video of Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ultra-Fab Products RV and Camper Hitch - Frame Mount Hitch - UF35-946403 Review
Speaker 1: Today we're taking a look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames. This unit provides a 2" by 2" trailer hitch receiver opening at the rear of your trailer or RV. This is perfect for mounting the bike rack, cargo carrier or other hitch accessory. Please keep in mind that this is not to be used for towing applications.It welds onto I-beam, C-channel or rectangular trailer frames. Also keep in mind that a gusset may be required to weld onto I-beam frames. And a plate may be required to weld onto a C-channel frame.
Its constructed of heavy-duty, powder coated steel. Does a great job at resisting rust and corrosion. Features a 3500-lb weight load capacity and a 350-lb maximum tongue weight capacity. You always wanna be careful not to exceed the RV frame rating provided by the manufacturer. And one of the neat features about this unit is that it's adjustable.So it has these arms right here that can slide out.
It's able to adjust anywhere from 47-1/8" all the way out to 77". And it is a weld on installation. So these arms extend out. Really nice design. Same construction and same finishing as the main hitch.
And then it comes with some hardware here, and those are set bolts. So on the back side, once you have the arms extended where they need to be, you thread in the bolt here to kinda lock that arm into position. And again, it's a weld on installation designed to be welded onto the RV or trailer frame.Again, adjustable from 47-1/8" to 77". Right here you have a 2" by 2" opening. This will accept a standard 5/8" diameter hitch pin or hitch lock.
And then you have safety chain loops right here that provide a suitable point for securing any accessory that you might have if it has an accessory strap or a tie down strap or a cable or chain. That's what these are used for. Overall really nice design. And that's gonna do it for today's look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames - UF35-946403
Average Customer Rating: 4.8 out of 5 stars (90 Customer Reviews)
Use this receiver to carry a bike rack or cargo carrier on the back of your trailer. Do not use for towing. Unit welds onto I-beam, C-channel or rectangular fifth-wheel trailer frames.by: Jerri02/10/2024
This hitch was welded onto a forest river salem 28 ft trailer and it is used to carry two electric bikes which each weigh 90 lbs. plus the carrier weighs about 60 lbs and it has worked very well.
by: Steven 10/05/2023
Had it installed on back of fifth wheel and it has held up very good carrying 2 70 lb electric bikes.
Much better than the bike rack attached to it has not handled the load as well. W
I would recommend tHis hitch!
by: Marsha Z04/30/2020
We needed to add a bike rack to our Cougar 28sgs fifth wheel and felt the fifth wheel bumper would not be strong enough to support carrying bikes. We purchased this hitch and turned it upside down so it rested on top of the fifth wheel bumper and welded it to the frame of the fifth wheel for support. The hitch was a perfect width to reach the frame of the fifth wheel.
by: Ray04/27/2019
Installed this hitch along with a heavey 1/4" x 4'' steel rear costom bumper and attached them both to the frame and welded both together to make it even stronger to pull just about anything. Another trailer or a car dolly or cargo hauler.
by: James10/04/2018
I purchased this hitch receiver so that I could attach a bike rack to the back of my camper. It was easy to assemble, adjust and install with the help of a friend who is a welder. It does add weight to the back of the trailer and load needs to be adjusted to reduce trailer sway in my case.
by: Sean08/08/2018
I dont know how to weld, so I had my shop at work do it for me. Our welder had it done like like 40 minutes!
The build quality on this hitch receiver is top notch. It is very heavy, sturdy and well built. I have complete faith in the hitch itself. I plan to use a Lets Go Aero BikeWing T4 bike rack and one of my bikes is a $5000 bike, so I needed to make sure whatever I got would be sturdy and well built.
by: Jason07/13/2022
Prompt delivery. Product is much more heavily made than expecting considering it’s not recommended for towing. Quality material and construction. I plan to mount it upside down to keep adequate ground clearance on the back end of my pop up camper.
by: Garth 03/01/2024
It allowed me to customize and weld up what I needed. Very strong.
by: James01/10/2024
The package arrived on time and fortunately all items were still in the shipping carton but the carton was extremely damaged and torn open on both ends. The shipper obviously does not take care with the shipment. The picture they took does not match what was left at my gate. I am just happy to get the item with all pieces in tact.
by: Joel 05/04/2023
Great experience!! The ad was clear with helpful pics and was accurate. The order shipped in one day and delivered within three working days. It is more heavy duty than I anticipated which is great. Workmanship looks excellent. I will have to hire a welder to attach it but it should be simple and work well. Exactly what I needed to be able to transport my ebikes on the back of my travel trailer when I go camping. I will keep this company on my recommendation list.
by: Chris P03/25/2018
UF35-946403 ultra-fab weld on hitch install pics
by: Michael 04/30/2023
Very heavy duty hitch. Easy to fit in between the frame of the Rv with the adjustable arms.
by: David07/22/2019
I needed a trailer hitch for the rear of my 5th wheel toy hauler. I found this company on-line and after reading some really positive reviews I ordered one. The website was very easy to use, especially for a computer challenged user. E-mails came quickly that my order was placed and then shipped. The package arrived quickly. First thing I noticed was box was kind of, well not falling apart but kind of. Extra tape was used on both ends. When I lifted it I realized why, this thing was HEAVY! After cutting the box open and inspection I was really impressed. The paint looked good. I inspected the welds and they looked very good, very NICELY done. I will be taking my 5th wheel and this hitch to a local trailer shop for install. Overall I am very impressed with the on-line ordering, the hitch exceeded my expectation. I will be towing a small open trailer with my Side by Side on it.
David
7/22/2020
Yes it’s been a year since I bought this hitch. I had it welded on the rear of my toy hauler. The shop I used made quick work of it, a job well done. It only cost $100.00 . That is as far as I’ve gotten with it. I am modifying a trailer to haul my RZR and don’t have it done yet so I have not pulled anything with it.
by: Jon01/04/2021
Purchased the product and had it shipped to a courier pickup location. Packaging was a little beat up but no damage. Had the product installed on a 2018 36 ft fifth wheel. The product needs to be welded onto the frame and my installers had no issue with doing this. They did weld the adjustable sleeves together instead of using the bolt to tighten them together. Also had the receiver part of the hitch welded to the trailer bumper for extra support. Product is well made and the paint has held up well with no visible rust after over one year of use. Remember to paint over the weld areas. etrailer purchase was no issue and delivered on time.
Jon
1/11/2022
Product is still holding up with no issues after one year.
by: James04/03/2023
I can't rate this yet because the middle section was missing. Box had large holes torn and UPS tried to cover them with cardboard box and tape. Melissa gets 100 stars for helping me. Hopefully all the parts will make it here.
by: Dana 09/11/2022
This is an excellent product. It was much stronger and better made than I anticipated. I had a certified welder come to my house and weld this hitch to my E-Pro trailer. I can now mount my bicycle rack to carry my two e-bikes safely while travelling. Recommended product.
by: Matthew 04/12/2021
Packaging had me very worried, because it was taped and repaired like it been through a war on both inside and outside boxes. I would have given 5 stars otherwise. Seems like a good quality hitch and fit my application. Thank you for finding a nice product for me!
Matthew W.
4/13/2022
Still going strong after a year! Great hitch
by: Curtis O.05/22/2017
This is my 2nd Ultra-Fab Trailer Hitch I have ordered and installed from
etrailer. There is a reason for that, it is a great product! I have never been
disappointed from any etrailer product. The service is next to none at etrailer!
The Ultra-Fab Hitch is very well made, with quality craftsmanship. I would
not hesitate to order again. (If I have to! Dang Hail Storms in Wyoming!)
by: Les F.07/11/2016
Received the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frame as promised. Installation was simple. Once positioned, clamped it and started welding. Centered the receiver and tightened the bolts then added a spot weld for backup.
by: Bruce08/18/2015
Excellent product! The item was out of stock but communication with ET was on great. They notified me of when the unit would be available and when it was shipped and delivered as well. It was in good condition other than being a bit scuffed up by the shipping company. It fit my 31' 5R just fine and the welder took only an hour to install it. Very sturdy product! It'll work perfectly for my bikes and would likely work just fine for a Moped as well. One word of caution; you will likely have to purchase an extension (mine is 8") for the receiver if you have a fiberglass body. It makes the bikes wobble a lot more so you'll have to use tie-down straps (a good idea anyway). Very happy with this.
by: Ronald10/29/2017
Excellent product. Very tough, straight and true. Had it welded up onto my 5th wheel by a trailer welding shop for about $110. I use it for a bike rack only but an equipment rack would work also.
by: Vino Vilano01/17/2020
I had this welded to my 40’ fifth wheel and using a Kuat bike carrier I hauled 4 large frame mountain bikes over 20 thousand miles and across the worst roads the US interstate system has to offer. It worked perfect.
by: Jason04/25/2022
Works great for what I purchased for, hauling pedal bikes. Was able to mount upside down so receiver goes over rear bumper, keeping hitch higher.
by: Kyle O07/20/2019
Very easy to use product. Fit well and very sturdy. Had a friend weld it on and I trust it more than the trailer frame metal! I use it for 2 place bike rack.
by: Neil Lageman08/27/2018
As always Etrailer has come thru. I ordered this part from another vendor cancelled it because of delay and ordered from Etrailer and received it a day early. Thanks Lori
PS. Now my bike rack, my trucks 5th wheel hitch and my rv receiver hitch is thanks to Etrailer and my credit card. Etrailer is the most professional organization I have ever done business with.
25
90
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV and Camper Hitch
- RV Bike Rack Hitch RecommendationWhen it comes to hauling bike racks on a travel trailer there's a couple of things you have to take into account. The hitch must be rated enough to haul the weight of the bike rack and bikes. Most camper bumpers are not rated to haul anything and can easily bend or be ripped off when weight is added. You'll need to look through your owner's manual to determine the weight capacity of your hitch. If your hitch weight capacity is not enough you can weld on the Ultra-Fab 2" Trailer Hitch...
view full answer... - Adjustable Width Trailer Hitch Receiver for RVsThe pics you have attached look like it may be the Curt Adjustable Trailer Hitch Receiver, # C13702. This will adjust from 18"-51" in width with a 2" drop, it is a Class III - 2" hitch with a ma tongue weight of 500 lbs. and can be bolted or welded to the RV frame. Any accessory used with this hitch much be approved for use with RVs. Please see the attached product review video.
view full answer... - Trailer Frames Compatible with Ultra-Fab 2-Inch Trailer Hitch Receiver UF35-946403Ultra-Fab 2" Trailer Hitch Receiver # UF35-946403 is a general-purpose weld-on hitch that will fit I-beam, C-channel or rectangular trailer frames from 47- to 77-inches in width. It is not specific to any brand or series of trailer, such as your 2014 Keystone Bullet 247BHS, so to see if it is a suitable fit you'll want to measure the trailer frame rails to make sure their spacing falls into the range noted above. This hitch is intended only for use with hitch-mount accessories such as...
view full answer... - Hitch Tube Dimension of Ultra Fab Trailer Hitch for RV UF35-946403The dimension you are looking for is 5-1/4 inches on the Ultra Fab hitch part # UF35-946403 that you referenced. I attached a picture that has the dimension pointed out in blue.
view full answer...
- Comparing The Curt Bolt-On RV Hitch Receiver To The Weld-On Ultra-Fab Receiver Ground ClearanceIf you compare the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 bolt-on receiver to the weld-on Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 there will be a difference in ground clearance of about 3 inches. The bolt-on hitch will sit about 3 inches closer to the ground than the weld-on hitch.
view full answer... - Recommended Trailer Hitch Receiver For 2018 Coachman Freedom Express 19 Foot Travel TrailerFor your 2018 Coachman Freedom Express 19 foot travel trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This is for use with accessories only and is not for trailer use. It is a bolt-on or weld-on application. If you are looking for a weld-on only option, I recommend the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403. This is also compatible with I-beam frames and is adjustable from 47-1/8 to 77 inches.
view full answer... - Trailer Hitch for a 2015 Camp Lite Trailerto answer your first question, anywhere at all that you can attach the strap will work provided the attachment point on the trailer is higher than the attachment point on the accessory. There isn't a right or wrong place. It just has to be on there. For the hitch, # 13703, you will not want to modify it at all because doing so will void the hitch warranty. If this hitch is not going to work without modification I recommend looking at another option, # UF35-946403 for 47 to 77 inch wide...
view full answer... - Mounting Options For An Ultra-Fab Trailer Hitch Receiver On A 2019 Grand Design Imagine 2600RB You could weld the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 to the box frame that's welded to the frame of your 2019 Grand Design Imagine 2600RB travel trailer but would need to have a fabricator come out and look at the quality of the weld to determine if it can bear the weight you'll be placing on it. Other than that your only other option would be to remove the box frame and then mount it directly to the trailer frame.
view full answer...
- Which Trailer Hitch will Fit RV Frame Width of 74 inches from Outside to OutsideWe have a hitch that would work great for you but the Curt hitch part # 13703 can only fit trailer frames that measure up to 72 inches apart from outside to outside. So since yours measures 74 it would be too wide you'd instead want the part # UF35-946403.
view full answer... - Looking for RV Hitch With Drop of At Least 3 InchesThe measurement you're looking for is referred to as the drop. The # UF35-946403 Hitch has a drop of 2 inches, which wouldn't be sufficient for you. Curt offers the # 13703 hitch that has a three inch drop, but Curt's warranty requires that a stabilizing strap like part # 18050 be used for non-trailer loads like bike racks or cargo carriers. Since most motorhomes and trailers don't have a good spot to attach the strap, I'd pass on that one. Your best bet would be a hitch like the Draw-Tite...
view full answer... - Adjustable Hitch Receiver For An RV The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 will need to be welded to actual frame of your camper. If the distance between the frame is 72" or less you'll be able to use the # 13703 to tow up to 3,500lbs or haul your bikes (up to 350lbs tongue weight). If the distance is greater than 72" then you can use the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames 47" - 77" Item # UF35-946403 but this hitch is not meant for towing a trailer and only for...
view full answer...
- Best Hitch for the Back of my Keystone 5th WheelWe have a couple of great options for you like the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide part # C13704 that you looked at. It is designed to work with frames anywhere from 22" up to 66" If your frame is wider then the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames part # UF35-946403 is the way to go because it will work with frames up to 77" wide. Both come with all of the hardware you will need to complete your installation. To decide which one is...
view full answer... - Ultra-Fab 2 Trailer Hitch Receiver For Carrying Bikes on Rear of RVIf your camper has frame rails that are between 47-1/8 and 77 inches apart, the Ultra-Fab # UF35-946403 will work. The hitch has a 350 lb tongue weight capacity, which means that the weight of the bikes and the rack they're carried on cannot exceed 350 lbs. This being said, be aware that most bike racks out there aren't designed for use on the rear of a towed camper. A bike rack installed on a towed camper will be subjected to an extreme amount of bouncing and crashing that it wouldn't...
view full answer... - Trailer Hitch and Weight Distribution Recommendation For 2007 Mercedes Benz ML350Both hitches share the same basic design and the same capacity, but I'd personally choose the Curt # 13342 over the Draw-Tite # 75376 because I feel that Curt does a better job with their powder coat finish. To realize the full capacity of the hitch, you'll want to use a weight distribution hitch, and because travel trailers are pretty vulnerable to trailer sway caused by crosswinds and oncoming and passing traffic, I'd recommend going with a system that includes an effective sway control...
view full answer... - RV Hitch Recommendation that Does Not Require Stabilizer StrapYes, the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 is a multi-fit hitch that will work great on your RV that has a 350 lb tongue weight capacity and does not require a stabilizer strap like the Curt hitches do. As long as your frame is between 47-1/8" to 77" the hitch will fit and work well. I attached a review video for more info as well.
view full answer... - Frame-Mounted Hitches for 5th Wheel TrailersTrailer makers do not usually include frame dimensions in their website specs, and I found this to be true for Keystone. Also, since there are currently 19 different models of 5th wheel trailer in the Montana High Country series it is possible that frame dimensions could differ between models and model years. The best ways to confirm your frame width are to crawl under the trailer and remove the panels that are blocking access for measuring or to contact Keystone with your VIN so that they...
view full answer... - Recommended Trailer Hitch for Dutchman Fourwinds with Jack Behind BumperThe best and easiest option to install a trailer hitch on the back of a trailer is with the Curt RV Bumper Hitch part # C19101 which bolts onto a standard 4" x 4" rear bumper. The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames part # UF35-946403 or one like it would not work in your particular application as it would need to be moved much further up therefore removing the jack you pointed out. Please note, if you need more support you can obtain brackets to help further support...
view full answer...
- Trailer Hitch and Cargo Carrier to Hold a Generator on an Airstream TrailerUltra-Fab 2" Trailer Hitch # UF35-946403 is pretty much a universal fit type of item. If the frame spacing on your Airstream is 47 to 77 inches then this hitch can be installed. It has a 350 pound tongue weight capacity so the combined weight of the cargo carrier and the Honda generator cannot exceed that limit. For a cargo carrier than can be used on the back of a trailer or RV I recommend TorkLift carrier # TLA7752 because it is large enough to hold the Honda 3000 generators. The carrier...
view full answer... - Bolt-On RV Hitch for Travel Trailer with 72-Inch Frame WidthWe do offer hitches designed for installation on trailer and RV frames. We also offer bumper-mount RV hitches that can be installed on certain RVs that have a continuously-welded (not spot-welded) steel bumper. Both types can be seen by clicking on the linked page. We offer two frame-mount hitches that can fit on a 72-inch-wide trailer frame (measured from the outside of one rail to the outside of the other). These are the bolt-on Curt # 13703 and the weld-on Ultra-Fab # UF35-946403. Both...
view full answer... - Recommended Receiver Hitch for Rear of Forest River Fifth Wheel I'd begin by contacting Forest River to ensure that the frame members at the rear of your fifth wheel have sufficient capacity to carry the weight of the carrier and the scooter without damaging anything. If Forest River gives you the go-ahead, I'd recommend the # UF35-946403 hitch, which is compatible with frame members that are between 47-3/8 to 77 inches apart, measured from the inside of the frame. This hitch is a weld on application, and has a 350 lb tongue weight capacity, meaning...
view full answer... - Recommended Hitch For A 2015 Jayco PinnacleWhen it comes to installing a trailer hitch on your 2015 Jayco Pinnacle Fifth Wheel, I recommend The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 will fit your fifth wheel. The trailer hitch can be either bolted on or welded on and can fit a frame between 47-1/8 inch to 77 inch frames. The hitch has a maximum tongue weight of 350 pounds. The hitch has a high-gloss black powder coat finish that resists rust, corrosion, and is resistant to scratches and UV damage....
view full answer... - Bolt Diameter For The Curt Adjustable Trailer Hitch Receiver For A 2019 Vilano 5th WheelThe Adjustable Width Trailer Hitch Receiver for RVs # 13703 only fits frames up to 72" so you would need a trailer hitch receiver like the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames Item # UF35-946403. This hitch has a TW capacity of 350lbs and is not meant for towing. It will need to be welded on to the frame. As for the bolts on the #13703 they are 1/2" diameter carriage bolts.
view full answer... - Universal-Fit Hitch For Front Installation on 1999 Mitsubishi Montero SportThere are no custom-fit front-mounted hitches made for your 1999 Mitsubishi Montero Sport but as you noted we do offer some universal-fit hitches intended for RVs that might work for you. These hitches are made with adjustable mounting brackets that allow them to fit on vehicle frames of varying widths. They also vary in their weight ratings. You'll want to have a look at the front-end frame access on the Montero to see if you have enough space to mount one of these. The Ultra-Fab # UF35-946403...
view full answer... - Recommended Trailer Hitch for my 2017 Lance 1685 Travel TrailerI have a good solution but the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75082 is not a confirmed fit. Instead the Ultra-Fab 2" Trailer Hitch Receiver part # UF35-946403 is one that can be customized to your trailer frame and give you the 2"x2" receiver tube opening you want. Check out the video I linked for you on it.
view full answer...
Do you have a question about this RV and Camper Hitch?
Used Items Available
Condition: Badly Dinged
Notes: Parts are beat and chipped up.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Halie H
Updated by:
Noah M
Video Edited:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Marsha Z.
5/1/2021
Great very sturdy and well made